Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps 1

Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps 2

Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps 3

Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps

YBS-9016P anti -seize compound is made with inorganic thickener, contains no soap base, and contains low- viscosity base oil and other high-temperature solid lubricating additives.

It exhibits excellent adhesion and anti-seize properties to threaded bolts , prevents metal scraping and corrosion, and provides corrosion protection, anti-seize, wear resistance, and heavy-duty resistance.

Inquiry

Write a Review

Performance characteristics

Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps 4 Excellent anti-bite performance and high temperature resistance

Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps 5 Excellent anti-friction and anti-wear properties.

Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps 6 Has sealing stability

Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps 8 Extreme pressure anti-wear properties

Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps 9 Excellent corrosion protection

Performance characteristics

Testing items	Typical data	Test Standards
Cone penetration (60 times) at 40℃, 0.1mm	300	GB/T 269
Dropping point, ℃	>200	GB/T 3498
Oil separation of steel mesh (100℃, 22h), %	/	SH/T 0324
Copper sheet corrosion (24h, 100℃)	qualified	GB/T 7326 Method A
color	black	Visual inspection
Density at 25℃, g/cm3	1.264	ASTM D1298
Evaporation loss (100℃, 22h)	<5	ASTM D972

Application and Packaging Specifications

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 Suitable for lubricating bolts and valves to prevent seizing and sticking or jamming.

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 Suitable for fastening bolts, chains, and low-speed rotating bearings in high-temperature and high-pressure equipment such as locomotives, cement plants, ships, and automobiles. Also suitable for lubrication and wear prevention in sliding bearing devices.

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 Gear anti-seize lubrication

bolts

valves

Fastening bolts, chains, and low-speed rotating bearings

Gears

Vacuum Stable PFPE Oil YBS-1099 Manufacturer YBS Perfluoropolyether oil equivalent to Krytox GPL100A for vacuum pumps 17

Operating Precautions

■ Remove contaminants and residues before use. Can be applied by smearing, oil bath, or spraying. Do not mix with other oils.
■ The information provided in this agreement is not guaranteed to be 100% accurate. We cannot guarantee that the product will be suitable for your application. Therefore, the above information should be used as advice only.

How To Use

■ Surface Preparation: Ensure all surfaces are clean, dry, and free of oil, dust, moisture, and old lubricants before application.
■ Apply Evenly: Use a brush, spatula, or gloved hand to apply a uniform layer to threads, bolts, nuts, or contact surfaces.
■ Use Proper Amount: Apply a thin, even film. Avoid excessive application to prevent contamination or assembly issues.
■ Assembly: Assemble components immediately after application and tighten according to specified torque.

Let's Discuss Your Needs.

Please fill out the contact form below if you would like to receive more information about our company or our product range.