Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid 1

Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid 2

Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid

YBS-HS240 is a perfluoropolyether product with a narrower molecular weight, possessing excellent chemical resistance, thermal resistance and dielectric properties, and is non-toxic, has no flash point, no ignition point, and low viscosity. It is mainly used in the treatment of vapor phase welding fluids.

Inquiry

Write a Review

Performance characteristics

Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid 3 Mineral/Synthetic Oil Resistant.

Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid 4 Detergent Resistant.

Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid 5 Hydrolysis Resistant.

Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid 7 Low Moisture Absorption.

Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid 8 Dielectric Properties.

Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid 9 Non Flammable.

Performance characteristics

Application and Packaging Specifications

YBS- HS240 is used in the vapor phase soldering process of PCB circuit boards in the semiconductor and electronics industries. It can effectively reduce the soldering temperature and avoid hot spots during the process.

Note:

* This product is available in a 1kg tin can . For information on safe disposal of the product , please refer to the product MSDS.

* This is an atmospheric volatile product. After use, please seal the can immediately and store in a cool, dark place . Keep away from heat sources.

*Contact with oxidants, strong acids, and alkaline substances is strictly prohibited

Semiconductors

vapor phase soldering

Equivalent to Galden® HS240 PFPE Vapor Phase Solder Reflow Fluid 12

Operating Precautions

■ Avoid overheating above recommended temperature.
■ Use in well-ventilated areas.
■ Prevent contamination with other oils or solvents.
■ Keep container tightly closed.
■ Avoid contact with hot decomposition products.
■ Use compatible metals, plastics, and elastomers only.
■ Store away from moisture and direct sunlight.

How To Use

■ Ensure the system or surface is clean and dry before use.
■ Fill or apply YBS-HS240 according to equipment requirements.
■ Operate within the recommended temperature range.
■ Avoid contamination with water, dust, or other fluids.
■ Keep the container tightly sealed after use.
■ Replace fluid periodically based on operating conditions.