Equivalent to VIGOGREASE RE0 Grease for Gears Industrial Robots
Performance characteristics
Performance characteristics
| Test Item | Test Method | YBS-RE0 | |
| Thickener | / | lithium soap | |
| Base oil kinematic viscosity@40℃,mm²/s | ASTM D 445 | 80 | |
| Appearances | / | yellowish brown,semi - fluid | |
| Worked penetration | ASTM D 217 | 380 | |
| Dropping point,℃ | ASTM D 566 | 190 | |
| Copper strip corrosion (100℃,24h) | ASTM D 4048 | Pass | |
| Evaporation loss, mass% (99℃,22h) | ASTM D 972 | 1.00 | |
| Oxidation stability, kPa (99℃, 100h) | ASTM D 942 | 22 | |
| Worked stability | FTMS 791C-313 | 400 | |
| Low-temp. torque, mN·m |
(-30℃)starting running | ASTM D 1478-63 | 220 32 |
| Four-ball EP,N | L. N. S. L. W. P. L. W. I |
ASTM D 2596 | 1236 3089 520 |
The above data are typical values for the product and do not constitute a contract.
Data for each batch of products may fluctuate within the acceptable range of Jialede's quality standards.
Application and Packaging Specifications
■ Keep away from open flames and high-temperature surfaces.
■ Wear protective gloves and goggles during application.
■ In case of skin or eye contact, rinse immediately with plenty of water.
■ Store in a cool, dry place, away from direct sunlight.
■ Dispose of used grease according to local regulations.
■ Apply grease – Use manually or via automatic lubrication systems, ensuring even coverage on all contact surfaces.
■ Use appropriate amount – Apply enough to form a protective film; avoid over-application to prevent leakage or overheating.
■ Check regularly – Replenish grease as needed based on operating conditions.
Industrial Lubrication Manufacturer.
Contact Us
ADD: Building 15, No. 142, Jinghai West Road, Chang'an Town, Dongguan City, Guangdong Province, China