Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 1

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 2

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 3

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 4

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 5

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102

YBS-BHP 72-102 Grease is refined with perfluoropolyether oil (PFPE) as the base oil and polyurea as the thickener . It has good high and low temperature performance , strong anti-corrosion properties, and strong water resistance , providing long-lasting and stable lubrication protection for equipment, effectively reducing friction and wear, and extending the service life of components.

Inquiry

Write a Review

Performance characteristics

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 6 Extremely low evaporation loss characteristics.

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 7 Good thermal stability.

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 8 Excellent viscosity index.

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 10 Excellent low-temperature torque value.

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 11 Provides long-lasting lubrication over a wide service temperature range.

Performance characteristics

Project	Typical data	Test methods
NLGI consistency level	3	ASTM D 217
Working cone penetration, 0.1mm	240-270	GB/T 269
Dropping point, ℃	>240	GB/T3498
Corrosion resistance (52℃, 48h)	Qualified	GB/T 5018
Operating temperature	-40 ℃ ~200 ℃	-
density	1.3 g/ cm³	-
Kinematic viscosity of base oil at 100°C	20 mm² / s	-
Kinematic viscosity of base oil at 40°C	130 mm² / s	-
Appearance	Black paste	Visual inspection
Corrosion resistance (52℃, 48h)	Qualified	GB/T 5018
Shear viscosity, rotational viscometer, 25°C, 300 s-1, lower limit	4000 mPas	-
Shear viscosity, rotational viscometer, 25°C, 300 s-1, upper limit	8000 mPas	-
Flow pressure, -40°C	<1400 mbar	DIN 51805-2
Velocity factor (nx dm)	Approximately 1,000,000 mm/min	-

Application and Packaging Specifications

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 12 As an economical long-lasting or lifetime lubricant , it is used in a wide variety of ball bearings that withstand extreme thermal loads. Examples include bearings in motor bearings, fans, power tool pumps, textile machinery, office equipment, household appliances, and automotive parts such as belt tensioners, guide pulleys.

* This product is available in 1kg tin cans, 0.5kg tin cans, 18kg drums, and 200kg drums. Please store in a dry place, away from other flammable materials, heat sources and direct sunlight .

For information on safe disposal of the product, please refer to the product MSDS.

household appliances

ball bearings

belt tensioners

fans

guide pulleys

motor bearings

office equipment

textile machinery

Extreme Heat Load Bearing Grease Equivalent to KLUBER BHP 72-102 21

Operating Precautions

■ Ensure surfaces are clean before application.
■ Do not mix with other lubricants.
■ Avoid over-greasing.
■ Use within recommended temperature range.
■ Keep container tightly closed and avoid contamination.

How To Use

■ Grease can be applied using a spatula, brush, grease gun, or grease dispenser.
■ The spray must not be exposed to direct sunlight or stored in an environment with a temperature higher than 50°C.

Let's Discuss Your Needs.

Please fill out the contact form below if you would like to receive more information about our company or our product range.