Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 1

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 2

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers

YBS-3283 is a transparent, colorless, thermally stable, fully fluorinated liquid, ideally suited for various single-phase heat transfer applications in the semiconductor manufacturing industry.

With a boiling point of -65°C, it is suitable for heat transfer in data centers, high-performance computing, power electronics, and other applications. The liquid can also be used for electronic testing and as an inert reactive medium.

Inquiry

Write a Review

Performance characteristics

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 3 This product has ideal chemical inertness and can be widely used in various temperature control and heat dissipation systems.

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 4 Non-hazardous materials are non-flammable and non-explosive, with no ignition point and no flash point.

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 5 It has good electrical insulation and extremely high breakdown voltage (greater than 40KV ).

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 6 Non-toxic, harmless, and non-irritating.

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 8 Excellent fluidity, allowing for effective heat dissipation within temperature control systems.

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 9 Low dielectric constant, which will not cause data loss in data center applications.

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 10 Environmentally friendly, with extremely low GWP and ODP of 0.

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 11 It is immiscible with water, thus avoiding damage to components from moisture.

Performance characteristics

Properties			Properties
Boiling Point	°C	121-124（estimated by visual inspection）	Specific Heat	J/kg-K	1.12
Pour Point	°C	-65	Thermal Conductivity	W/mK	0.064
Critical Temperature	°C	225	Surface Tension	mN/m	14.8
Critical Pressure（25℃）	MPa	1.32（25℃）	Solubility of Water in Fluid	ppm by weight	48
Vapor Pressure（25℃）	kPa	1.50（25℃）	Solubility of Fluid in Water	ppm or by weight	6
Heat of Vaporization	KJ/Kg	8 2	Dielectric Strength Range, 0.1" gap	kV	42
Liquid Density	Kg/m³	1825	Dielectric Constant @1kHz	-	3
Coefficient of Expansion	K-1	0.0016	Volume Resistivity	Ohm-cm	1.8x101 1
Kinematic Viscosity	cSt	0.80	Global Warming Potential	-	105
Absolute Viscosity	cP	1.6

Application and Packaging Specifications

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 Widely used in various temperature control and heat dissipation systems, especially suitable for immersion cooling of computer server systems;

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 It is also used in equipment temperature control and cooling in semiconductor manufacturing, and in the cooling and safety protection of electric vehicle battery packs ;

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 Cleaning agents for electronic products;

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 Used as an intermediate in the synthesis of fluorinated surfactants and other fluorinated chemicals.

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 This product is supplied in 1KG and 5KG 25KG 200KGdrum packaging.

Immersion cooling of computer server systems

Temperature control and heat dissipation systems

Electric vehicle battery packs

Semiconductor manufacturing

Cleaning agents for electronic products

Fluorinated fluids Equivalent to Electronic Liquid FC-3283 for Etchers 22

Operating Precautions

■ Use in well-ventilated areas.
■ Avoid contact with eyes and prolonged skin exposure.
■ Keep container tightly closed when not in use.
■ Do not mix with other chemicals.
■ Store in a cool, dry place away from sunlight.

How To Use

■ Apply by immersion, spraying, or ultrasonic cleaning.
■ Ensure full contact with the parts to be cleaned.
■ Allow to evaporate naturally after cleaning, no rinsing needed.
■ For cooling, use in closed systems and keep sealed.

Let's Discuss Your Needs.

Please fill out the contact form below if you would like to receive more information about our company or our product range.