High‑Temperature Long‑Life Grease for Rolling Bearings 1:1 Alternative for Klüber STABURAGS NBU 12/300 KP 1

High‑Temperature Long‑Life Grease for Rolling Bearings 1:1 Alternative for Klüber STABURAGS NBU 12/300 KP 2

High‑Temperature Long‑Life Grease for Rolling Bearings 1:1 Alternative for Klüber STABURAGS NBU 12/300 KP 3

High‑Temperature Long‑Life Grease for Rolling Bearings 1:1 Alternative for Klüber STABURAGS NBU 12/300 KP 4

High‑Temperature Long‑Life Grease for Rolling Bearings 1:1 Alternative for Klüber STABURAGS NBU 12/300 KP

Heavy‑Load Grease for High‑Temperature Industrial Bearing Applications

YBS NBU 12/300 KP is a high-performance long-lasting lubricant. It is made with synthetic hydrocarbon base oil and lithium complex soap thickener, along with extreme pressure and anti-wear additives. It is specifically developed for rolling bearings operating under high temperatures, heavy loads, and oscillating conditions. It boasts excellent thermal stability and antioxidant properties, maintaining a stable lubricating film at high temperatures, prolonging the bearing grease replacement cycle, reducing equipment maintenance costs, and is widely used in various high-temperature industrial equipment.

Inquiry

Write a Review

Performance characteristics

✅ Excellent high‑temperature resistance: Suitable for continuous high‑temperature operation

✅ Long service life: Reduces re‑greasing frequency, lowers maintenance cost

✅ Strong extreme‑pressure & anti‑wear performance: Protects bearings under heavy shock and load

✅ Good oxidation stability: Resists thermal degradation at elevated temperatures

✅ Lithium‑complex thickener: Good mechanical stability, suitable for oscillating and intermittent operation

✅ Wide industrial compatibility: Ideal for high‑temperature rolling bearings in various industrial equipment

Performance characteristics

Item	Specification
Product Type	Lithium‑complex soap synthetic hydrocarbon long‑life grease
Base Oil	Synthetic hydrocarbon oil
Thickener	Lithium‑complex soap
Operating Temperature Range	‑30℃ ~ +160℃, short‑term peak up to +180℃
NLGI Grade	NLGI 2 (refer to official TDS for exact value)
Anti‑wear Property	With anti‑wear additives
Extreme‑pressure Property	With EP additives
Applicable Speed	Low to medium speed
Applicable Friction Pairs	Rolling bearings, mainly for high‑temperature applications

The above data are typical values for the current product. The data for each batch of products in the future may fluctuate.

Application

High‑temperature rolling bearings: Motors, fans, blowers, heaters, drying equipment, conveyor bearings under high‑heat environment
Heavy‑load industrial equipment: Extruders, plastic machinery, textile high‑temperature machinery, kiln auxiliary bearings
Oscillating / intermittent running bearings: Frequent start‑stop, reciprocating swing and shock‑load bearing parts
General high‑temperature factory machinery: Printing machinery, packaging equipment, heat‑exposed mechanical components
Process‑heat exposed components: Parts close to furnaces, ovens and thermal processing lines

❌ Not suitable for: Food‑contact environments; long‑term contact with strong solvents or aggressive chemicals; high‑speed ultra‑precision bearings. Verify material compatibility before use.

The operating conditions of the components near th

Swinging intermittent operation bearing condition

Overloaded industrial equipment operating conditio

General mechanical conditions of a high-temperatur

High‑Temperature Long‑Life Grease for Rolling Bearings 1:1 Alternative for Klüber STABURAGS NBU 12/300 KP 10

Operating Precautions

Avoid mixing with unknown greases; incompatible thickeners or base oils will degrade performance. Do not over‑fill bearings; excess grease leads to temperature rise, noise and leakage. Confirm operating temperature, load and speed match product specification before application. Store in sealed container, keep away from moisture, dust and direct sunlight. Not for food‑grade or pharmaceutical contact applications without formal certification. Dispose waste grease and packaging in compliance with local environmental regulations.

How To Use

■ Clean gears and remove old lubricant before application.
■ Apply grease evenly to gear teeth and contact surfaces.
■ Use an appropriate amount to ensure full coverage without excess.
■ Apply manually or through a lubrication system.
■ Run equipment at low speed after application to ensure proper distribution.

Let's Discuss Your Needs.

Please fill out the contact form below if you would like to receive more information about our company or our product range.