Noise-reducing Gear Grease for Reducer Metal Gears----1111 1

Noise-reducing Gear Grease for Reducer Metal Gears----1111 2

Noise-reducing Gear Grease for Reducer Metal Gears----1111 3

Noise-reducing Gear Grease for Reducer Metal Gears----1111 4

Noise-reducing Gear Grease for Reducer Metal Gears----1111

YBS-6194 gear grease is a high-load gear grease thickened with a complex lithium soap-based thickener and high-viscosity fully synthetic base oil, with added extremely fine colloidal dispersed solid wear-resistant lubricants, antioxidants, corrosion inhibitors, and other additives.

This high-viscosity extreme-pressure gear lubricant maintains a stable lubricating film under high loads and is designed for lubrication of gears and friction parts of mechanical equipment requiring high adhesion and heavy loads. It can increase the life of high-load equipment, provide shock absorption and vibration damping, and smooth the surface of damaged gears.

Inquiry

Write a Review

Performance characteristics

Noise-reducing Gear Grease for Reducer Metal Gears----1111 5 Excellent ability to withstand high-voltage loads and impact loads.

Noise-reducing Gear Grease for Reducer Metal Gears----1111 6 Excellent adhesion, lubricity and high temperature resistance, suitable for use in high-temperature applications.

Noise-reducing Gear Grease for Reducer Metal Gears----1111 8 It has good mechanical and oxidation stability, resulting in a long service life.

Noise-reducing Gear Grease for Reducer Metal Gears----1111 9 It has good water resistance, rust prevention and corrosion resistance, and can be used on friction surfaces affected by dust.

Performance characteristics

Project	YBS-6194	Test methods
Color Appearance	A light yellow, uniform paste	Visual inspection
NLGI, number	2	ASTM D217
Working cone penetration (25℃): 0.1mm	260	ASTM D217
Dropping point, ℃	250	ASTM D2265
Evaporation loss (180℃, 1h), Wt.%	1	ASTM D972
Corrosion, (100℃, 24h, 45# steel), grade	1a	ASTM D4048
Four-ball extreme pressure test, sintering load, N	7840	ASTM D2596
Operating temperature range, ℃	-40~220	--------
Note: The above technical data are the average values of current product testing results and may be affected by limited errors in production. We reserve the right to modify the data.

The above data are typical values for the current product. The data for each batch of products in the future may fluctuate.

Application and Packaging Specifications

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 Suitable for low-to-medium speed lubrication parts such as automotive steering switches, plastic gears, slide rails, plastic-to-plastic and plastic-to-metal components, with an operating temperature range of -25 ℃ to 150 ℃.

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 This product is available in 5KG and 16KG packaging . For product safety handling information, please refer to the product MSDS.

*Please store in a dry place, away from other flammable materials, heat sources and direct sunlight.

slide rails

plastic gears

automotive steering switches

Noise-reducing Gear Grease for Reducer Metal Gears----1111 15

Operating Precautions

■ Ensure gear surfaces are clean before application.
■ Do not mix with other lubricants unless compatibility is confirmed.
■ Avoid over-lubrication, especially in enclosed gear systems.
■ Use within the recommended temperature range.
■ Prevent contamination during storage and application.

How To Use

■ Clean gears and remove old lubricant before application.
■ Apply grease evenly to gear teeth and contact surfaces.
■ Use an appropriate amount to ensure full coverage without excess.
■ Apply manually or through a lubrication system.
■ Run equipment at low speed after application to ensure proper distribution.

Let's Discuss Your Needs.

Please fill out the contact form below if you would like to receive more information about our company or our product range.