Synthetic Lubricating Grease Suitable for Food & Beverage Equipment Valves 1：1 Alternative for Klüber PARALIQ GTE 703 1

Synthetic Lubricating Grease Suitable for Food & Beverage Equipment Valves 1：1 Alternative for Klüber PARALIQ GTE 703 2

Synthetic Lubricating Grease Suitable for Food & Beverage Equipment Valves 1：1 Alternative for Klüber PARALIQ GTE 703 3

Synthetic Lubricating Grease Suitable for Food & Beverage Equipment Valves 1：1 Alternative for Klüber PARALIQ GTE 703 4

Synthetic Lubricating Grease Suitable for Food & Beverage Equipment Valves 1：1 Alternative for Klüber PARALIQ GTE 703

Replacement for Klüber PARALIQ GTE 703 | NSF H1 Food‑Grade Silicone Grease for EPDM Seals

YBS-703 is a white PTFE‑thickened silicone grease. With NSF H1 approval for incidental food contact, this NLGI 3 grease is optimized for sealing components with EPDM gaskets. It delivers stable performance under wide temperature ranges, and is ideal for low‑load, low‑speed valve and sealing applications in food‑processing machinery.

Model:

YBS-703

Inquiry

Write a Review

Performance characteristics

Synthetic Lubricating Grease Suitable for Food & Beverage Equipment Valves 1：1 Alternative for Klüber PARALIQ GTE 703 5 Excellent adhesion, lubricity and high temperature resistance, suitable for use in high-temperature applications.

✅ Wide temperature tolerance: Operating range -50℃ to +150℃, resistant to hot water, steam and disinfectants

✅ PTFE thickener: Good anti‑wear performance, does not affect beverage foaming characteristics

✅ German original manufacture: Reliable quality for industrial sealing & valve maintenance

Performance characteristics

Item	Specification
Product Name	YBS-703
Base Oil	Silicone oil
Thickener	PTFE (Polytetrafluoroethylene)
NLGI Grade	3
Color	White homogeneous paste
Operating Temperature	-50℃ ~ +150℃
Density(20℃)	1.31 g/cm³
Certification	NSF H1
Origin	Germany
Package	750g can
Art No.	0221480036

The above data are typical values for the current product. The data for each batch of products in the future may fluctuate.

Application

Valves, faucets, cocks and pipe fittings with EPDM elastomer seals

Food, beverage, pharmaceutical production equipment sealing components

Low‑load, low‑speed plain bearings (C/P＞30)

Water treatment equipment, sanitary‑grade pipeline joint lubrication

747d5109-71be-470d-9701-d674db15dadc

a8dffb50-eeed-4b07-a25c-c4933657ce1f

e0b4d3a6-31d6-4252-952a-d658f8d78cbb

Synthetic Lubricating Grease Suitable for Food & Beverage Equipment Valves 1：1 Alternative for Klüber PARALIQ GTE 703 10

Operating Precautions

❗ Not compatible with FKM/Viton fluororubber seals, will cause rubber swelling and failure. For light‑load and low‑speed applications only, not suitable for high‑speed or heavy‑load bearings. Silicone‑based grease, do not use on electrical contact points for insulation‑critical applications. Keep container tightly sealed after use; avoid contamination by dust and impurities. Store in cool, dry environment, away from direct sunlight.

How To Use

■ Clean gears and remove old lubricant before application.
■ Apply grease evenly to gear teeth and contact surfaces.
■ Use an appropriate amount to ensure full coverage without excess.
■ Apply manually or through a lubrication system.
■ Run equipment at low speed after application to ensure proper distribution.