YBS-AMBLYGON TA 15/2 Polyurea Long‑Life High‑Temperature Grease,‑20℃~150℃ Water‑Resistant Adhesive Grease for Printing Machinery, Conveyors and Hot Rollers 1

YBS-AMBLYGON TA 15/2 Polyurea Long‑Life High‑Temperature Grease,‑20℃~150℃ Water‑Resistant Adhesive Grease for Printing Machinery, Conveyors and Hot Rollers

Industrial Bearing Grease | High Adhesion Lifetime Lubricant for Heavy‑Duty Equipment

Formulated with polyurea thickener and high‑quality mineral base oil, it exhibits strong adhesion to metal friction surfaces and resists being thrown off under operating conditions. It withstands hot‑cold water vapour as well as diluted acidic and alkaline media, delivering excellent anti‑oxidation, anti‑aging and anti‑corrosion protection. Suitable for bearings and joints exposed to high temperature, heavy load and humid environment. It is widely applied for printing press air pump bearings, conveyor systems, hot rollers, water pumps and hinge joints. It extends re‑lubrication intervals and lowers overall maintenance cost for heavy‑duty production equipment。

Model:

YBS-AMBLYGON TA 15/2

Inquiry

Write a Review

Performance characteristics

Long‑term / lifetime lubrication performance, extend relubrication cycle, cut maintenance cost

Great adhesion to metal surfaces, hard to throw‑off under running vibration

Wide working temperature:‑20℃ ~ +150℃, stable under continuous high‑temperature operation

Excellent resistance to hot‑cold water, water vapour, diluted acid and alkali media

Superior anti‑oxidation, anti‑aging and anti‑corrosion protection for metal components

Compatible with mineral‑oil resistant elastomer seals

Proven for printing, conveyor, hot‑roller and general heavy‑duty machinery

Performance characteristics

Item	Parameter
Product Name	YBS-AMBLYGON TA 15/2
Color & Appearance	Brownish‑tan homogeneous paste
Thickener	Polyurea
Base Oil	Mineral oil
NLGI Grade	2
Operating Temperature	‑20℃ ~ +150℃
Drop Point	≥260℃
Density(20℃)	approx.0.93 g/cm³
Speed factor n×dm	approx.350 000 mm/min
Shelf‑life(unopened)	60 months
Typical Application	Printing machine, conveyor, hot roller, pump, hinge joint, heavy‑load bearings

The above data are typical values for the current product. The data for each batch of products in the future may fluctuate.

Application

Rolling bearings and articulated joints under high‑temperature and heavy‑load conditions

Printing machine air‑pump bearings, high‑speed woodworking machine spindles

Conveyor equipment, hot rollers, water pumps, rotary kiln auxiliary bearings

Working environment with water spray, steam, diluted acid and alkali exposure

Heavy equipment hinge pins

High-temperature bearings for hot rollers

Printing press air pump bearings

Operating Precautions

Industrial‑use only, not food‑grade, shall not contact food products. Do not mix with other incompatible greases, will degrade lubrication performance. Store sealed in cool, dry place; prevent moisture and dust contamination. Unopened shelf‑life 60 months. Continuous working temperature shall not exceed +150℃.

How To Use

■ Clean gears and remove old lubricant before application.
■ Apply grease evenly to gear teeth and contact surfaces.
■ Use an appropriate amount to ensure full coverage without excess.
■ Apply manually or through a lubrication system.
■ Run equipment at low speed after application to ensure proper distribution.