YBS-BEM 34 132 Long Life Rolling Bearing Grease, Calcium Complex Thickened Synthetic & Mineral Oil Lubricant, Vibration Resistant Anti-Wear Grease for Automotive Hub 1

YBS-BEM 34 132 Long Life Rolling Bearing Grease, Calcium Complex Thickened Synthetic & Mineral Oil Lubricant, Vibration Resistant Anti-Wear Grease for Automotive Hub

YBS-BEM 34 132 Extreme Durable Bearing Grease, -35℃ Low Temperature Resistant

This grease features excellent thermal stability and aging resistance, supporting ultra-long maintenance cycles. It maintains stable lubricating fluidity at low temperature down to -35℃ without hardening or oil separation, and adapts to long-term operating temperature up to 140℃. With excellent vibration resistance and corrosion resistance, it can form a stable and durable lubricating oil film on bearing friction surfaces under continuous oscillation and impact load. It is widely applicable to automotive hub bearings, shock absorber bearings, wind power equipment bearings, linear guides and ball screw spindles, suitable for both dynamic operation and long-term standby sealing lubrication, greatly reducing equipment maintenance frequency and operating costs.

Model:

YBS-BEM 34 132

Inquiry

Write a Review

Performance characteristics

YBS-BEM 34 132 Long Life Rolling Bearing Grease, Calcium Complex Thickened Synthetic & Mineral Oil Lubricant, Vibration Resistant Anti-Wear Grease for Automotive Hub 5 Excellent ability to withstand high-voltage loads and impact loads.

YBS-BEM 34 132 Long Life Rolling Bearing Grease, Calcium Complex Thickened Synthetic & Mineral Oil Lubricant, Vibration Resistant Anti-Wear Grease for Automotive Hub 6 Excellent adhesion, lubricity and high temperature resistance, suitable for use in high-temperature applications.

YBS-BEM 34 132 Long Life Rolling Bearing Grease, Calcium Complex Thickened Synthetic & Mineral Oil Lubricant, Vibration Resistant Anti-Wear Grease for Automotive Hub 8 It has good mechanical and oxidation stability, resulting in a long service life.

YBS-BEM 34 132 Long Life Rolling Bearing Grease, Calcium Complex Thickened Synthetic & Mineral Oil Lubricant, Vibration Resistant Anti-Wear Grease for Automotive Hub 9 It has good water resistance, rust prevention and corrosion resistance, and can be used on friction surfaces affected by dust.

Performance characteristics

Project	YBS-6194	Test methods
Color Appearance	A light yellow, uniform paste	Visual inspection
NLGI, number	2	ASTM D217
Working cone penetration (25℃): 0.1mm	260	ASTM D217
Dropping point, ℃	250	ASTM D2265
Evaporation loss (180℃, 1h), Wt.%	1	ASTM D972
Corrosion, (100℃, 24h, 45# steel), grade	1a	ASTM D4048
Four-ball extreme pressure test, sintering load, N	7840	ASTM D2596
Operating temperature range, ℃	-40~220	--------
Note: The above technical data are the average values of current product testing results and may be affected by limited errors in production. We reserve the right to modify the data.

The above data are typical values for the current product. The data for each batch of products in the future may fluctuate.

Application and Packaging Specifications

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 Suitable for low-to-medium speed lubrication parts such as automotive steering switches, plastic gears, slide rails, plastic-to-plastic and plastic-to-metal components, with an operating temperature range of -25 ℃ to 150 ℃.

Custom YBS-8030 Quick-Drying Dry Film Lubricant Manufacturer YBS 6 This product is available in 5KG and 16KG packaging . For product safety handling information, please refer to the product MSDS.

*Please store in a dry place, away from other flammable materials, heat sources and direct sunlight.

slide rails

plastic gears

automotive steering switches

Operating Precautions

■ Ensure gear surfaces are clean before application.
■ Do not mix with other lubricants unless compatibility is confirmed.
■ Avoid over-lubrication, especially in enclosed gear systems.
■ Use within the recommended temperature range.
■ Prevent contamination during storage and application.

How To Use

■ Clean gears and remove old lubricant before application.
■ Apply grease evenly to gear teeth and contact surfaces.
■ Use an appropriate amount to ensure full coverage without excess.
■ Apply manually or through a lubrication system.
■ Run equipment at low speed after application to ensure proper distribution.

Let's Discuss Your Needs.

Please fill out the contact form below if you would like to receive more information about our company or our product range.