Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 1

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 2

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 3

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings

YBS-BE41-1501 is a high-purity rolling bearing grease for long-term lubrication. It is designed to meet the requirements of rolling bearings subject to extreme conditions.

The appropriate combination of base oil and additives enables improved wear protection. The product also provides good corrosion protection and is compatible with seals, e.g. made of NBR elastomers.

Inquiry

Write a Review

Performance characteristics

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 4 Excellent wear protection under the highest dynamic load conditions.

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 5 Good load-carrying capacity at low rotational speeds.

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 7 Reliable lubricant film formation at high service temperatures.

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 8 Emergency lubricating properties due to the addition of special solid lubricants.

Performance characteristics

Test items	You Bang Shou	Testing standards
Chemical composition, thickener	special lithium soap
Sevice temperature	-10 °C / 14 °F-150 °C / 302 °F
Colour	black	/
Kinematic viscosity of the base oi，100	approx. 60 mm²/s	DIN 51562
Kinematic viscosity of the base oil, 40 °C	approx. 1500 mm²/s	DIN 51562
Drop point，°C	180 °C	DIN ISO 2176
Density at 20 °C	0.92 g/cm³	/

☆ The above data are typical values for the product and do not constitute a contract.

Data for each batch of products may fluctuate within the acceptable range of Jialede's quality standards.

Application and Packaging Specifications

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 9 YBS-BE41-1501was developed for highly-loaded large rolling bearings running at low speeds as well as toothed gear systems such as industrial and rail traction gear couplings.

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 10 This product is available in 5KG and 16KG packaging . For product safety handling information, please refer to the product MSDS .

*Please store in a dry place, away from other flammable materials, heat sources and direct sunlight .

highly-loaded large rolling bearings

industrial and rail traction gear couplings

Slow-Speed Bearing Grease for Heavy-duty Rolling Bearings 13

Operating Precautions

■ Ensure gear surfaces are clean before application.
■ Do not mix with other lubricants unless compatibility is confirmed.
■ Avoid over-lubrication, especially in enclosed gear systems.
■ Use within the recommended temperature range.
■ Prevent contamination during storage and application.

How To Use

■ Clean gears and remove old lubricant before application.
■ Apply grease evenly to gear teeth and contact surfaces.
■ Use an appropriate amount to ensure full coverage without excess.
■ Apply manually or through a lubrication system.
■ Run equipment at low speed after application to ensure proper distribution.

Let's Discuss Your Needs.

Please fill out the contact form below if you would like to receive more information about our company or our product range.