Overheating bearings, stiffened chains, or a threaded joint that will not open can interfere with the flow of production. These problems arise when the friction, heat, or contamination is greater than the lubrication. Industrial lubricants provide protection to contacting surfaces, manage wear, and are capable of maintaining machine operation to achieve repeating duty cycles.
But not all mechanisms can be lubricated with the same oil. Different types of protection are required for a circulating gearbox, an exposed conveyor chain, and an assembly fastener.
Once maintenance teams are aware of the various types and their respective limitations, they can better specify materials that go beyond the general durability descriptions.
Industrial lubricants are liquid oils, semi-solid greases, assembly pastes and solid film coatings. Most prevent close contact of moving surfaces; others prevent seizure during assembly or disassembly. Others remove heat or are corrosion resistant.
Protective film needs to be effective during the movement, stopping and starting of the component. It reacts to pressure, sliding velocity, temperature and surface condition. A fast-rotating bearing might not be able to use a sliding-part formulation.
Liquid oil can flow through narrow spaces and can be topped up at working surfaces. It is also applicable to enclosed gears and equipment that are designed to be lubricated by oil feed, as well as circulation systems.
Chemical resistance and low volatility in specific high-temperature (up to 450°F) or vacuum applications are offered by specialized PFPE lubricating oils. They have a different chemistry than traditional oils and any existing lubricant or seals must be checked prior to conversion.
Grease has a thickener to keep the lubricating oil in the contact area. Industrial bearing grease is used to help rolling-element assemblies, while gear grease needs to be used in gear teeth to accommodate contact.
PFPE grease has another chemistry for challenging operating environments. The YBS-1904 long-life formulation, for example, contains base oil of PFPE with solid lubricants that have high temperature resistance. The appropriate grease depends on operating speed, load, and the need for relubrication. When changing an existing grease, consider the compatibility of the grease thickeners because mixing incompatible greases may alter the consistency and oil release.
Dry film lubricant is applied to a surface as a lubricating film without the need for continuous supply of a lubricating oil.
Application method matters. The D-7409 is a thermal-curing coating that, when heat-cured, creates a solid film in metal-to-metal oscillating and intermittent motion. The application process requires surface preparation and the specified curing conditions, rather than simply applying the coating as a finish.
Generally anti-seize compounds are not continuously on moving machinery. They prevent galling, sticking or seizure of threaded connections, flanges and other mating metal surfaces when exposed to heat or corrosive environments.
They also have a bearing on tightening friction. Although a fastener can be lubricated with anti-seize, it may have a different clamping force at the same torque, hence the approved assembly specification should be used for application.
Silicone grease can be used in certain sealing or valve applications due to its waterproof and antiozonant properties. Compatibility with the rubber or plastic type used for the actual product should still be determined—silicone grease is not always suitable for all rubber and plastic types.
Another role performed by industrial chain oil is to lubricate pins and joints while on an exposed moving chain. Film formation and oil loss can be as important as initial lubrication on heated equipment.
|
Type |
Typical use |
What to confirm before use |
| Circulating oil | Enclosed gear and oil-feed systems | Flow at startup; operating viscosity |
| Bearing or gear grease | Rolling bearings and gear mechanisms | Speed rating; grease compatibility |
| PFPE lubricant | Chemically aggressive or vacuum mechanisms | Seal compatibility; volatility limits |
| Dry film coating | Intermittent sliding components | Substrate preparation; curing conditions |
| Anti-seize compound | Threaded joints and hot assemblies | Metal compatibility; torque procedure |
| Silicone grease or chain oil | Seals, valves, and exposed chains | Elastomer behavior or deposit formation |
Viscosity is the measure of resistance to flow in a fluid, while a grease's NLGI grade describes its consistency and are not a measure of the base-oil viscosity. Oxidation stability refers to resistance to degradation in air and heat and mechanical stability refers to the ability of the grease to withstand working forces. The dropping point is not an indicator of a grease's ability to run continuously at that temperature; it's a lab test.
Other specifications come into play in niche applications. Where evaporation can be a factor in vacuum equipment, low volatility is important. Water resistance is useful in washdown or damp environments. Material compatibility is also important to protect seals, plastics, and coatings against swelling or degradation. Test these properties under operating conditions, not just at room temperature.
The lubricant for a heated chain drive in textile machinery must be able to penetrate to the articulated joints without dripping or causing excessive deposits. Some parts of the machines need to withstand moisture and continuous use in the pulp and paper manufacturing process, which is why it is important to consider water resistance and ease of maintenance. Robotic reducers include repeated start/stop/reversals and require smooth motion and an appropriate film formation.
Another problem arises with semiconductor equipment: lubricant migration or evaporation could impact sensitive processes. Some PFPEs can be used for compatible vacuum-side mechanisms, but cleanliness standards need to be determined for each application.
The most obvious advantage is reduced wear at the point of contact. This can help preserve dimensions and surface finish in precision mechanisms, limit bearing damage, and make planned maintenance more predictable. With proper application, anti-seize can make disassembly easier; for certain components, a good dry coating can eliminate the need for wet lubrication.
Don't forget that there is no automatic savings. Comparable loads and duty cycles must be used to measure energy saving. If a more expensive lubricant lasts longer, it will save money. Calculate the true labor, lubricant, cleaning, component replacement, and production downtime cost of relubrication. Monitor them over the same operating periods before crediting improvements to a product change.
There are many differences between industrial lubricants. Oils must flow to where they are required, greases must be able to release lubricant and stay in place, dry films are dependent on proper surface preparation, and assembly compounds must seal the joint without interfering with assembly methods. Understanding these differences makes it easier to evaluate product specifications.
The first logical step to take is to determine the contact surface and the task for which the lubricant is meant, then check the limits of performance with the appropriate product information. Explore YBS industrial lubrication products for category-specific options. Choose consistent, verified performance over advertised benefits.
Contact Us
ADD: Building 15, No. 142, Jinghai West Road, Chang'an Town, Dongguan City, Guangdong Province, China