Model: YBS-1672
Jialede YBS-1762 sealing silicone grease is a chemical substance used for sealing and insulating valves and O-rings on electrical equipment. It is available in liquid and solid forms, with an operating temperature range of -50°C to 200°C. Its advantages are good water resistance, good sealing, resistance to mineral oil and most chemicals, and good electrical insulation.
Performance Advantage
◎ Excellent high temperature sealing performance.
◎ Excellent sealing performance and high and low temperature performance, working temperature -40~220 degrees.
◎ The excellent oil film composition of the base oil gives the grease higher anti-friction and wear characteristics.
◎ Excellent high temperature and adhesion properties, low friction coefficient and high load carrying capacity.
◎ Excellent plastic compatibility performance.
◎ Good insulating properties, strong material adaptability, compatible with most plastics and silicone.
◎ Excellent corrosion protection performance
◎ Excellent rust and corrosion resistance, effectively reduce the maintenance cost of lubricated parts by 60%. Copper color, non-staining, acid and alkali corrosion resistance and non-corrosive metal, resistance to resist hot and cold water.
◎ Enhanced extreme pressure, anti-wear properties.
◎ Excellent load-bearing capacity and lubrication performance, lower wear coefficient, in high temperature and high load conditions to reduce lubricated parts wear 80%. Wear-resistant, anti-shaft locking, even under high surface pressure can prevent hysteresis phenomenon.
Typical Data
| Item | Quality Indicators | Test Method |
| Appearance | White translucent ointment | Visual inspection |
| NLGI Grade, # | 3 | GB/T 269 |
| Working taper, (25°C), 0.1mm | 220-250 | GB/T 269 |
| Dropping point | No | GB/T 4929 |
| Oil separation degree (100℃, 24h),% ≤ | 1.5 | HG/T2502-1993 |
| Volatile matter content,% ≤ | 1.4 | HG/T2502-1993 |
| Waterproof sealing ≥ | 3 | HG/T2502-1993 |
| Corrosivity test | None | HG/T2502-1993 |
| Electrical strength, Mv/m | 14.6 | HG/T2502-1993 |
| Operating temperature, ℃ | -40-220 | -- |
Application
◎ Sealing and lubrication of low-speed sliding parts such as various valves, cylinders, plugs, joints and so on.
◎ Lubrication and sealing between metal and metal, metal and plastic moving parts.
◎ Apply to the lubrication and sealing of the ground glass joints and glass piston in the vacuum system with high vacuum degree up to 7.0×10-7KPa.
◎ Lubrication and sealing of lubrication parts of various toys, aquariums, kitchen appliances and sanitary equipments in water environment.
◎ Lubrication and sealing of lubricated parts of optical equipment, instruments and meters.
◎ Sealing and lubrication of low-speed sliding parts of glass, ceramic or metal valves, solenoid valves, etc. in contact with chemicals.
◎ Apply to chemical contact and glass, ceramic or metal lubrication and anti-corrosion. Applicable to the damping of potentiometer, insulation and sealing of electrical appliances.
◎ Liquid coupling filling medium, automotive brake pumps, O-ring sealing and lubrication.
Quick Links
Email: jonnanhuang@gmail.com
WhatsApp: +86 18934578611
Tel: 0769-81668391
WeChat : YBSLUBE
Add.: Room 302, building 15, No.142 jinghaixiroad, Chang 'an town, Dongguan City, Guangdong province
Send Inquiry
Inquire Now
Contact Us
Feel free to reach out for any queries. We would be happy to help!
Add.
Room 302, building 15, No.142 jinghaixiroad, Chang 'an town, Dongguan City, Guangdong province
